What did you do with your H3 recently? NEW

[Lewiz VenomH3]

Got a new muffler coming in tomorrow. Bought a magnaflow super 10

Sent from my SM-G950U using Tapatalk

 

[Lewiz VenomH3]

Should I remove the resignator too?

Sent from my SM-G950U using Tapatalk

 

[CaddyStrophic]

Mounted my CB radio. I ended up hiding the wires up through the console.

Sent from my Nexus 6 using Tapatalk

 

[JPaul]

I'm assuming the masking tape holding up the mic was a temporary feature...

 

[derian06]

Should I remove the resignator too?

Sent from my SM-G950U using Tapatalk

In my opinion yes, the pic I posted should be behind the resonator.

Have you smelled exhaust fumes in the cabin?

After flooring it, there is a smell, only with the windows open though.

 

[Lewiz VenomH3]

Ok so after i cut the pipe how far down should I put the new muffler. Got a super 10 coming in tomorrow.

Sent from my SM-G950U using Tapatalk

 

[derian06]

Ok so after i cut the pipe how far down should I put the new muffler. Got a super 10 coming in tomorrow.

Sent from my SM-G950U using Tapatalk

I'd take it to a local shop and just have them run pipes, see how it sounds without the muffler and with it on, and choose which you prefer. Shouldn't be too expensive 75$ or so around here.

 

[cgalpha08]

Does anyone know what this tape covers? It's on the passenger side right below the windshield where the pass wiper is.

I was replacing my vent cowl today and noticed water was pooling here. I didn't remove the tape as I didn't want to let water in. I'm assuming my old h3 had this and others do as well. Only way to see it is if you remove the vent paneling that goes where the windshield wipers are.

Sent from my SM-G930V using Tapatalk

 

[Lewiz VenomH3]

Following

Sent from my SM-G950U using Tapatalk

 

[derian06]

anyone ever pulled the headliner off/ have any pics of it completely off?

 

[Lewiz VenomH3]

anyone ever pulled the headliner off/ have any pics of it completely off?

Just had it dropped low enough to check drain tubes. What are you looking to do?

Sent from my SM-G950U using Tapatalk

 

[derian06]

Just had it dropped low enough to check drain tubes. What are you looking to do?

Sent from my SM-G950U using Tapatalk

I have 4 12's in the back on 3200Wrms with subs up and port up, so everything is bouncing off of the thin metal roof. planning on getting thin strips of birch conturing then to the roof and glueing them on with epoxy. then another lair with wood glue/screwed into the first lair. Then bracing with some flat bar steel or something. This should stop the flex and give me a sturdy roof. Just wanting to see what I have to work with, if any of this will even fit/work with the headliner before I take the time to drop the whole thing.

 

[Lewiz VenomH3]

I have 4 12's in the back on 3200Wrms with subs up and port up, so everything is bouncing off of the thin metal roof. planning on getting thin strips of birch conturing then to the roof and glueing them on with epoxy. then another lair with wood glue/screwed into the first lair. Then bracing with some flat bar steel or something. This should stop the flex and give me a sturdy roof. Just wanting to see what I have to work with, if any of this will even fit/work with the headliner before I take the time to drop the whole thing.

Has same issue with my mtx 9500s. Just made different box facing towards rear door.

Sent from my SM-G950U using Tapatalk

 

[Lewiz VenomH3]

Have you tried dynamat?

Sent from my SM-G950U using Tapatalk

 

[derian06]

Have you tried dynamat?

Sent from my SM-G950U using Tapatalk

I've thought about using an actual deadening product, but why do that? When I can do it myself, cheaper, and have a better finished product.

My box is absolutely maxed out as far as space goes, so there would be no way to have subs or port back without losing that precious air space.

I couldn't see anything out of the back anyways, 37" spare. Amp rack is beneath the box.

 

[Panzer07]

anyone ever pulled the headliner off/ have any pics of it completely off?

There's this guy in fb in H3 off-road who completely took out the headliner doesn't looks so bad...but if only do that if I was to turn panzer into a canvas soft shell.

Sent from my SM-G955U using Tapatalk

 

[Schwarttzy]

Fixed image in my post about the Firestik K-A1 Quick Disconnect, was testing if I could get Google Photo host my images... apparently not.

http://www.hummer4x4offroad.com/for...3-recently-NEW&p=215282&viewfull=1#post215282

 

[awalsh]

I've thought about using an actual deadening product, but why do that? When I can do it myself, cheaper, and have a better finished product.

My box is absolutely maxed out as far as space goes, so there would be no way to have subs or port back without losing that precious air space.

I couldn't see anything out of the back anyways, 37" spare. Amp rack is beneath the box.

It comes off pretty easy, I started pulling it off just to see what I was dealing with because I want to convert it to a black headliner


Sent from my iPhone using Tapatalk

 

[lowtrac]

Speaking of subs, I did this last weekend. The prior owner had a box in there but left the wiring so all I had to do was put it in and connect it. I had to replace the foam since these are 2000 era subs and they were rotten.

Sent from my iPhone using Tapatalk

 

[mjferencak]

The tape is there as a spacer/padding for the dash I believe. I shoved mine back in after I replaced the heater core.

Does anyone know what this tape covers? It's on the passenger side right below the windshield where the pass wiper is.

I was replacing my vent cowl today and noticed water was pooling here. I didn't remove the tape as I didn't want to let water in. I'm assuming my old h3 had this and others do as well. Only way to see it is if you remove the vent paneling that goes where the windshield wipers are.

Sent from my SM-G930V using Tapatalk

 

[cgalpha08]

The tape is there as a spacer/padding for the dash I believe. I shoved mine back in after I replaced the heater core.

So if I removed the tape, what is underneath it? anything that is easily damaged by water?

 

[deserth3]

Sorry. Posted by accident.


Sent from my LG-H700 using Tapatalk

 

[DJW1442]

Installed Rock lights, rigid radiance pods, new exhaust and tips, dual batteries, vair compressor and air horns from hornblasters.

Sent from my iPhone using Tapatalk

 

[lowtrac]

Installed Rock lights, rigid radiance pods, new exhaust and tips, dual batteries, vair compressor and air horns from hornblasters.

Sent from my iPhone using Tapatalk

So where's the horn demo video?


Sent from my iPhone using Tapatalk

 

[RamRod]

Started test fitting the new bed rack that I am making for the roof top tent... going camping for the rest of the weekend and have a trip planned for the next weekend as well so the mounting "feet" will have to wait a week and a bit before I get to designing/making them

Sent from my SM-G935W8 using Tapatalk