Search results

https://www.facebook.com/marketplace/item/930330549625376/

Have been dealing with a clickity clack noise for about a year. It has been progressively getting worse. The noise is only there when in Hi or Lo Lock when steering is more than 1/4 turned. Everyone said it is the RCVs, "they always click when they age", hence the reason for the excessive...

Has anyone looked into replacing the complete rear axle with a Silverado 1500 unit? When looking for a new spare axle shaft I am finding the GM half tons are 99% the same (if I read correctly). WMS H3 is 65.5" and 1500 is 67.5" R&P are same part numbers per Yukon. Tone rings are both 55...

I spend a lot of time traveling back and forth to Texas with the wife's Suburban with the baby Duramax. Man I love this engine, can only dream of what this could have been in the H3. Cruise control on 80 and getting over 21MPG and at these prices. Can't wait for the permanent move.

Happy New Year, H4O family. I am proud to show off my new grandson and newest H4O family member, Carter.

Who has cut their grill to fit a winch controller? Show some pics. I need to replace my Smittybilt X20 Gen 2 winch that failed. I would rather not have to remotely mount the control box behind the grill like I had before. But to keep it on top of the winch, the grill needs to be trimmed. I...

It's almost not worthy of posting, but it's close to off-road worthy. My wife's 2021 Suburban with the 3.0 Duramax needed some new tires, 60k on the Duratracs and they are close to done. Decided on a 2 inch lift and 33.5 BFG KO3's. Might have to take it to Cleghorn for a shake down run.

My son wanted a workbench in his garage when he goes back to base and wanted to make a DIY version. Well, the wheels started to turn, and we came up with this beast. We are fans of Blacktail Studio videos, so we knew it would be an epoxy top with some stickers and pictures underneath. Started...

Wife got me a new service tool box because I always complain my other is too heavy to move around now. First mod was to represent H4O.

Looking to add a spare rear driveshaft after the last rip to Sand Hollow. 2 different rigs had rear shaft issues and each had a spare, back on the trial in no time. This prompted me to get a spare. After a phone call and a generic quote of @$750, I searched around. Fort Wayne Clutch &...

Bought a Alpha air box for the upcoming swap from a junkyard. I knew the MAF sensor was removed but didn't realize both the screws were broke inside the holes. I have a removal kit but these are small and the stainless screws walk the bit. Who has a better idea to remove screws? Or a box lid...

I haven't posted in this section for a long time so I thought I would give a little update on a couple of runs I did this past month. I usually tag a long with a local group called Dirtnation. 3 weeks ago we did Odessa/Doran loop in Calico, it has been a while since I ran this and it did not...

After a few different lame attempts to fix the A pillar trim from lifting up I decided to do a better fix. My previous attempts included Gorilla tape that worked for a few months, heavy duty velcro with mixed results then finally small sheet metal screws, they actually held up well. I used...

I have been lazily chasing my traction control failure. So I finally stopped being cheap and bought a bidirectional scanner, a Foxwell NT809BT from Amazon for $300 used like new. It works great, took me 5 minuets to find what was throwing the code, C0710 Steering position malfunction. But...

Selling my 1st gen Lased Design headlight adapters. I was one of the few fortunate to but the metal 3rd gen. The only difference I see is the 3rd gen are a little more stable and reduce light movement. $50 + shipping.

I see 2 different model numbers for the side mirrors, only difference I can make out based on pictures online are the color of the connectors. They look like a 3 pin flat connector. The mirrors for the 08-10 years are a lot cheaper. Both numbers are for right side. 06-07 is 15884835 08-10 is...

Has anyone removed or replaced the 4 side window rubber seals? Going to be spraying Raptor liner next week and those are the only items left to pull.

Who has replaced the front and rear catalytic converters? What have you used? My exhaust just started to rattle and throwing a O2 code. With some advice I'm certain it is the rear. Not concerned with California compliant, will be registered in Texas soon.

Who has replaced the yaw sensor under the drivers seat? I tried to search here but the dreaded 3 letter word can't be used. I've been troubleshooting some ABS gremlins and this is my next stop. There is a huge price difference from $65 to $400. I started with the trusty Amazon $65 part for...

After the SAS install in my 06 I5 with hydro assist, my PS started to whine after a couple of trips. Fluid was getting very hot. I installed a new ACD pump before Moab last year and it only started to whine after I got back. Each trip to local trails it would start to whine quicker, to the...