H3 LED Foglight Brackets

[mantracker]

Another pm sent.

 

[Ron46]

One last bump for any info...

 

[mantracker]

This guy can't produce.

 

[rsc]

I understand he got busy with SEMA, but then it was *poof*, gone. Oh well, when they are ready I'm here. Not getting a third set for my newest one though.

 

[JJT]

Well, it's been a month since the last update....Anything new?

 

[justin94tt]

I know he got rid of his h3 and bought an h1. Hopefully he doesnt just ditch the brackets but it sure does seem he did.

 

[Ron46]

Ok, last chance hope bump to see if Adventr is around. I'm pretty sure he built and has the brackets looking back through this thread.

 

[JJT]

Ok, last chance hope bump to see if Adventr is around. I'm pretty sure he built and has the brackets looking back through this thread.

He was active on the forum last night....Soooo

 

[justin94tt]

Anyone tried shooting him a PM in reference to these?

 

[Ron46]

I sent him a pm last night but he said in a previous post that his phone does not receive PM's

 

[rsc]

All that's needed is to look in the upper right hand corner of the page when you are on the forum and it will tell you that you have notifications. It's easy enough to check once in a while.

 

[Goodhews89]

I would almost buy a 3d printer and just make these things

 

[CaddyStrophic]

I would almost buy a 3d printer and just make these things

I have 3 friends with nice 3d printers. If we could get all of the dimensions, I'm sure we could do it.

Sent from my Nexus 6 using Tapatalk

 

[adventr]

Hey guys! Haven't forgotten about you. Been getting lots of requests for these through Instagram as well.

Placed a $20k order for lights last month, and they are finally en route. Chinese new year stopped everything for a good couple weeks.

Lots of the 5" round lights coming, as well as a ton of other lights for the racks that I manufacture.

Testing went well on the sample lights that I posted pics of. Also, the lights on the h3 are still holding up great!


I'll update when everything gets here. I'm adding these to our website (which will launch soon), and you'll be able to place orders there. Was always a little leary taking all the money through my personal PayPal and then dealing with transferring it all to our business and what not. This solves all that.
I'm basically a 1-man show when it comes to designing/manufacturing/sourcing/ordering so everything is taking a lot longer than I had anticipated. I apologize for that.

Best way to keep up with everything that's going on with me is through Instagram. @t0mills

Thanks!

 

[Ron46]

any new updates?

 

[mantracker]

This guy has too many irons in the fire, or "ADD",ADHD"? I bought the lights he recommended months ago, and still have them on the shelf, with no brackets. I've sent several personal messages, with no replies. He said," call the shop to place an order", but didn't leave a number to call. I'm done!:gaah:

 

[CaddyStrophic]

This guy has too many irons in the fire, or "ADD",ADHD"? I bought the lights he recommended months ago, and still have them on the shelf, with no brackets. I've sent several personal messages, with no replies. He said," call the shop to place an order", but didn't leave a number to call. I'm done!:gaah:

Yeah, I'm not talking smack, but in the future it would probably be a better idea to have the finished product ready for purchase. Test the waters with a small batch and if there is high enough demand, make more.

My foglights should be here any day now and I guess I'm going to be making my own brackets.

Sent from my Nexus 6 using Tapatalk

 

[JJT]

Bump! Still want a set...

 

[alrock]

He's not answering my inquiries either. I think it's time to write this one off as dead.

 

[rsc]

Agreed

 

[JPaul]

Didn't someone just buy his H3 from him? I'm wondering if they can still get a hold of him and find out what's going on. But it was very conspicuous that as soon as he started looking at buying an H1 he dropped this project, and once he had his H1 he simply stopped posting. This is why we have supporting vendors that we can trust.

 

[adventr]

Looks like I have a lynch mob over here. Currently do not have the time to properly sell and support these parts, so I've edited the first post of this thread and added all of the manufacturing prints/specs for you guys to download. If anyone wants to take over manufacturing of the parts, feel free.

Also, you guys can take these prints to a local fab shop (someone with a laser/waterjet and a press brake) and they should have no problem knocking out a set of brackets for you.

Hope this helps!

 

[CaddyStrophic]

I appreciate the schematics. I'm going to be attempting a ghetto fab version for myself and see how it turns out.

Sent from my Nexus 6 using Tapatalk

 

[CaddyStrophic]

Also, a quick warning to anyone looking to purchase lights like these: I tested mine today and they are bright as a thousand suns.

I'm actually kind of nervous about installing these on my 3.

Sent from my Nexus 6 using Tapatalk

 

[rsm688]

Looks like I have a lynch mob over here. Currently do not have the time to properly sell and support these parts, so I've edited the first post of this thread and added all of the manufacturing prints/specs for you guys to download. If anyone wants to take over manufacturing of the parts, feel free.

Also, you guys can take these prints to a local fab shop (someone with a laser/waterjet and a press brake) and they should have no problem knocking out a set of brackets for you.

Hope this helps!

Thanks a ton for the prints/specs adventr!

I've got a buddy with a large fab shop that I'm sure can build these. I'm going to send him the specs and see what he can do with them. Is there anyone else on here that would be interested in a set if he can do them (which I'm sure he can)?