What did you do with your H3 recently? NEW

[Chris Laun]

I do like how you did the bed-liner. Great look and functional too.

The front faces of the rear fenders were starting to chip and look terrible so this was the best/cheapest solution I could come up with at the time. Honestly, it has held up better than expected

 

[the_real_hacksaw]

Thanks, and I actually used spray on bed-liner to protect the rear fenders. I pulled both fenders off the car, masked them off and sprayed on the bed-liner.

Yeah that’s a dang good idea !


Sent from my iPhone using Tapatalk

 

[Traxx]

Took her for a run in the snow. Never really occurred to me before but a drone would make for some fun action shots.

 

[H3V8]

I'm digging that GEN II thorparts bumper. Always wondered how it looked as a customer install.

 

[H3slate]

Me too!! Truck is looking real sharp!

 

[Acer4LO]

Took her for a run in the snow. Never really occurred to me before but a drone would make for some fun action shots.

Nice shot! Haven't seen a recent pic of your rig in a while. Also where did you buy your syklone prefilter and what model is it?

 

[08H3]

I'm digging that GEN II thorparts bumper. Always wondered how it looked as a customer install.

I want to see what some of you have used for lights in the Gen II bumper. Mine has been setting on a workbench since last year mainly because I'm undecided on lights. I really like the factory round lights, and even thought about having round holes cut in the pods. I hate to cut up such a nice bumper for that though.

 

[cgalpha08]

I want to see what some of you have used for lights in the Gen II bumper. Mine has been setting on a workbench since last year mainly because I'm undecided on lights. I really like the factory round lights, and even thought about having round holes cut in the pods. I hate to cut up such a nice bumper for that though.

I've been browsing different kinds for mine as well. If the measurements are right, I was thinking of going with KC led fog lights. I too want to keep the factory look going.

Sent from my SM-G950U using Tapatalk

 

[08H3]

Took her for a run in the snow. Never really occurred to me before but a drone would make for some fun action shots.

View attachment 23246

Definitely. I got a drone recently and still haven't really gotten comfortable with it. I was doing some tests of the "follow me" mode in a wide open area. Even that quick test in this video was pretty cool. Hunner is the drone man. I can't remember which forum it's on, but search for some of his stuff. It's really cool.

[video=youtube_share;W8hDryVf1Y8]https://youtu.be/W8hDryVf1Y8[/video]

 

[Traxx]

I called them up and they sent one that would work with the 5.3

Nice shot! Haven't seen a recent pic of your rig in a while. Also where did you buy your syklone prefilter and what model is it?

Not sure how round lights would look in a square hole. It's not a very big space, those flush mounts are only about 3.5" tall and they just fit.

I've been browsing different kinds for mine as well. If the measurements are right, I was thinking of going with KC led fog lights. I too want to keep the factory look going.

Sent from my SM-G950U using Tapatalk

Now I need a drone budget. Truck is almost done anyway so it will give me something to goof with and it's cheaper than an H2.

Definitely. I got a drone recently and still haven't really gotten comfortable with it. I was doing some tests of the "follow me" mode in a wide open area. Even that quick test in this video was pretty cool. Hunner is the drone man. I can't remember which forum it's on, but search for some of his stuff. It's really cool.

[video=youtube_share;W8hDryVf1Y8]https://youtu.be/W8hDryVf1Y8[/video]

 

[Acer4LO]

I got a drone recently and still haven't really gotten comfortable with it. I was doing some tests of the "follow me" mode in a wide open area. Even that quick test in this video was pretty cool. Hunner is the drone man. I can't remember which forum it's on, but search for some of his stuff. It's really cool.

Drones are really fun. I have a DJI phantom 3 that I have been using for commercial and residential photography side jobs. The best way to get better is just practice and get comfortable flying close to objects like trees and what not. Lol I have found I have gotten some of my favorite shots when I have put my drone in some questionable positions that don't leave a lot of room for error.

Hunner has a photography thread on here, if that is what you are thinking of: http://www.hummer4x4offroad.com/forum/showthread.php?977-Photography

 

[CreekH3]

Replaced the original battery terminals on my 07 and on first start already seems to turn over much faster. :thumbs:

 

[08H3]

Switched from the Blizzaks back to the KM2s. Blizzaks are unstoppable in the winter, but I hate the way they look. Nice to get some decent sized rubber back under the truck. They were getting really out of balance at the end of last year, so I had them rebalanced, and they are nice and smooth again. The KM2s are a great tire, but they are the worst I've ever had keeping them balanced. I picked up a new jack at Harbor Freight before changing them as my old Craftsman is leaking everywhere. I was reluctant to go with a 2 ton, but it lifts one end with no issue. This jack is great because it has a range from 2.375" - 23.5" It's perfect for both the Corvette and the H3. Really solid jack, too. Some Harbor Freight stuff is total throwaway garbage, but I've really been impressed with all of their jacks I've seen.

Note: If you can't see the pictures below, let me know. I had trouble figuring out how to embed pics from Google Photos, but I think I got it figured out.

 

[3rdH3]

Did a Street Tune at PCMofNC.

 

[Panzer07]

Did some small towing went to pick some h2 rims from a friends that was giving them away. Now I need to get 4 more 2 for spares 1 for PANZER and 1 for the trailer and 2 to replace the hmmwv's on the trailer. I seriously need to get to and paint match the trailer to PANZER's color

Sent from my SM-G955U using Tapatalk

 

[the_real_hacksaw]

Switched from the Blizzaks back to the KM2s. Blizzaks are unstoppable in the winter, but I hate the way they look. Nice to get some decent sized rubber back under the truck. They were getting really out of balance at the end of last year, so I had them rebalanced, and they are nice and smooth again. The KM2s are a great tire, but they are the worst I've ever had keeping them balanced. I picked up a new jack at Harbor Freight before changing them as my old Craftsman is leaking everywhere. I was reluctant to go with a 2 ton, but it lifts one end with no issue. This jack is great because it has a range from 2.375" - 23.5" It's perfect for both the Corvette and the H3. Really solid jack, too. Some Harbor Freight stuff is total throwaway garbage, but I've really been impressed with all of their jacks I've seen.

Note: If you can't see the pictures below, let me know. I had trouble figuring out how to embed pics from Google Photos, but I think I got it figured out.

No pics


Sent from my iPhone using Tapatalk

 

[08H3]

No pics


Sent from my iPhone using Tapatalk

Thanks for letting me know. I give up. Anyone know how to embed pics from Google Photos?

 

[H3TDave]

Switched from the Blizzaks back to the KM2s. Blizzaks are unstoppable in the winter, but I hate the way they look. Nice to get some decent sized rubber back under the truck. They were getting really out of balance at the end of last year, so I had them rebalanced, and they are nice and smooth again. The KM2s are a great tire, but they are the worst I've ever had keeping them balanced. I picked up a new jack at Harbor Freight before changing them as my old Craftsman is leaking everywhere. I was reluctant to go with a 2 ton, but it lifts one end with no issue. This jack is great because it has a range from 2.375" - 23.5" It's perfect for both the Corvette and the H3. Really solid jack, too. Some Harbor Freight stuff is total throwaway garbage, but I've really been impressed with all of their jacks I've seen.

Note: If you can't see the pictures below, let me know. I had trouble figuring out how to embed pics from Google Photos, but I think I got it figured out.

I'm seeing pics on my phone thru tapatalk

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[the_real_hacksaw]

I'm seeing pics on my phone thru tapatalk

Sent from my SAMSUNG-SM-G891A using Tapatalk

Odd I’m using Tapatalk too


Sent from my iPhone using Tapatalk

 

[08H3]

Totally confused on the Google pics issue now...

 

[scoreh3]

Switched from the Blizzaks back to the KM2s. Blizzaks are unstoppable in the winter, but I hate the way they look. Nice to get some decent sized rubber back under the truck. They were getting really out of balance at the end of last year, so I had them rebalanced, and they are nice and smooth again. The KM2s are a great tire, but they are the worst I've ever had keeping them balanced. I picked up a new jack at Harbor Freight before changing them as my old Craftsman is leaking everywhere. I was reluctant to go with a 2 ton, but it lifts one end with no issue. This jack is great because it has a range from 2.375" - 23.5" It's perfect for both the Corvette and the H3. Really solid jack, too. Some Harbor Freight stuff is total throwaway garbage, but I've really been impressed with all of their jacks I've seen.

Note: If you can't see the pictures below, let me know. I had trouble figuring out how to embed pics from Google Photos, but I think I got it figured out.

No pics too

 

[RamRod]

Lol at one point the photos rear 198% loaded...

On Tapatalk as well and can't see....

There might be setting on who can see you photos within Google photo

Sent from my SM-G935W8 using Tapatalk

 

[JPaul]

Better than my setup!

I have very little space as I installed a corvette engine fan as a pusher fan (I need a/c)
Had to trim the body and modify stuff to fit it.

Sent from my SM-G920F using Tapatalk

What power connector is that?

 

[amrg]

Its a specific connector for the brushless fan. Has 3 wires, ground, power and signal for fan operation.

Sent from my SM-G920F using Tapatalk

 

[JPaul]

Its a specific connector for the brushless fan. Has 3 wires, ground, power and signal for fan operation.

Sent from my SM-G920F using Tapatalk

Any part numbers on it? I'm still on the lookout for high amperage weatherproof connectors but for some reason I can't find any.

Sent from my SM-N950U using Tapatalk