icentropy
Active Member
- Messages
- 42
- Location
- Chesaw, WA
Just realized I've never posted to this forum so i figured (while the machines are running) I'd take some time to post up some new offerings that are coming the next few weeks.
1. Idler locking kit - A small upgrade that accomplishes two main goals, Locks both the front of the bolts by way of safety wire and the back with a custom backing plate, increases the clamping force by almost double using 1/2-20 L9 bolts. These means your idler will no longer come loose after a hard day wheeling and you can torque your idler bolts up to 120ftlbs (compared to the stock 60ftlbs) without worrying about stretching or weakening your bolts. Requires a 10 min. reaming out process of your frame sleeves, i provide the loaner reamer and all you need is a little WD-40 and a hand drill. Whole kit installs in less than 30 min. kits to be completed and ready to ship next week.
2. Cupholders (yes actually useable cupholders for the 96-03 Hummers (H1s). Fully machined out of aluminum. fit in factory front and back locations. coming off the machines as i type this.
3. Locking starter bolts - As simple as they sound. High quality Grade 10.9 starter bolts pre-drilled for safety wire and enough wire to install them a few times over. Starter bolts are only torqued to 30-40ft/lbs and if they get loose they'll eventually fall out rendering your truck unable to start. Often folks over-torque to prevent that stretching the bolts and causing them to eventually break off in the block. That's it's own nightmare of drilling them out. Simple $15 kit prevents that.
More stuff in the pipeline (locking fuel cap covers, interior storage kit, aux fuel tanks, etc.
Check out our website for current products.
1. Idler locking kit - A small upgrade that accomplishes two main goals, Locks both the front of the bolts by way of safety wire and the back with a custom backing plate, increases the clamping force by almost double using 1/2-20 L9 bolts. These means your idler will no longer come loose after a hard day wheeling and you can torque your idler bolts up to 120ftlbs (compared to the stock 60ftlbs) without worrying about stretching or weakening your bolts. Requires a 10 min. reaming out process of your frame sleeves, i provide the loaner reamer and all you need is a little WD-40 and a hand drill. Whole kit installs in less than 30 min. kits to be completed and ready to ship next week.
2. Cupholders (yes actually useable cupholders for the 96-03 Hummers (H1s). Fully machined out of aluminum. fit in factory front and back locations. coming off the machines as i type this.
3. Locking starter bolts - As simple as they sound. High quality Grade 10.9 starter bolts pre-drilled for safety wire and enough wire to install them a few times over. Starter bolts are only torqued to 30-40ft/lbs and if they get loose they'll eventually fall out rendering your truck unable to start. Often folks over-torque to prevent that stretching the bolts and causing them to eventually break off in the block. That's it's own nightmare of drilling them out. Simple $15 kit prevents that.
More stuff in the pipeline (locking fuel cap covers, interior storage kit, aux fuel tanks, etc.
Check out our website for current products.
I know i'm going a bit overboard on them but having fun and know when folks get them in their hands they're gonna flip over something as mundane as a cupholder. totally worth it.